Service Mode Table
G133 5-206 SM
005 Drum
0: Off, 1: On
006 Waste Toner Bottle
0: Off, 1: On
007 Transfer Belt
0: Off, 1: On
008 Fusing Unit
0: Off, 1: On
128 Interval :Others
132 Interval :A3
133 Interval :A4
134 Interval :A5
141 Interval :B4
142 Interval :B5
160 Interval :DLT
164 Interval :LG
166 Interval :LT
172 Interval :HLT
[250 to 10000 / 1000 / 1 /step]
[SC/Alarm Setting]
*CTL -
5515
With @Remote in use, these SP codes can be set to issue an SC call when
an SC error occurs. If this SP is switched off, the SC call is not issued when
an SC error occurs.
001 SC Call
[0 or 1 / 1 / - ] 0: Off, 1: On
002
Service Parts Near End
Call
[0 or 1 / 0 / - ] 0: Off, 1: On
003 Service Parts End Call
[0 or 1 / 0 / - ] 0: Off, 1: On
004 User Call
[0 or 1 / 1 / - ]
0: Off, 1: On
⇒
Rev. 01/2007
To Next Page
Loading...
