Service Mode Table
SM 5-223 G133
Service
Tables
0x04: Auto Change
Adjusts the USB transfer rate.
002 Vendor ID *CTL
Displays the vendor ID. DFU
003 Product ID *CTL
Displays the product ID. DFU
004 Device Release Number *CTL
Displays the development release version
number. DFU
[Delivery Server
Setting]
*CTL
-
5845
Provides items for delivery server settings.
Delivery Error Display Time
[60 to 999 / 300 / 1 second /step]
003
Specifies the interval time for sending an e-mail to the deliver server or
SMTP/FTP/NCP/SMB server after sending error.
Delivery Options
[0 to 99 / 3 / 1 time/step]
004
Specifies the retry times for sending an e-mail to the delivery server or
SMTP/FTP/NCP/SMB server.
5846 [UCS Settings]
*CTL -
LDAP Search Timeout
[1 to 255 / 60 / 1 /step]
010
Sets the length of the timeout for the search of the LDAP server.
AddrB Acl Info.
041
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
To Next Page
Loading...
