Message Cause Solution and reference
"Cannot access the
Memory Storage
Device."
An SD card or USB flash
memory device is
unavailable for use.
• Check that the external media is
formatted in FAT16 or FAT32, and write
encryption or protection is not enabled
on the media.
• Check that the external media is not
corrupted or damaged.
"Cannot find the
specified path. Please
check the settings."
The machine or the
computer is not
connected to the
network correctly.
Check that the machine or the computer is
connected to the network correctly. For details
about your network environment, consult the
network administrator.
The computer name or
folder name specified in
the path name is
incorrect.
Register the computer name and folder name
again.
The firewall function is
enabled on the
computer.
In the firewall function on the computer,
register the machine IP address and the port to
use for sending files as exceptions.
You can check the IP address in [Check Status]
"Network". For details about the ports, see
the following:
page 264 "List of Specifications"
"Check original's
orientation."
The original is placed in
the wrong orientation.
Depending on the combination of the specified
settings, the orientation to set the original
differs. Be sure to place the original in the
correct orientation.
See "Specifying the Orientation of the
Original", User Guide (Full Version).
When a Message Appears While Using the Scanner Function
223
To Next Page
Loading...
