3. Press [Print Test Sheet] for the paper input location of the paper feed you want to adjust.
4. Press [Start].
5. Press [Exit].
6. Check the optimal adjustment value based on the print results of the test sheet.
• The optimal adjustment value is the number next to the square pattern that has the faintest
color closest to gray and aligned horizontals on both sides. If the value on the left of the
pattern is "+2", the adjustment value is "+2".
• If the horizontal lines on the both sides of the faintest square are misaligned, determine an
adjustment value based on a pattern that is above or below, whose horizontals are
misaligned in the opposite direction. For example, "+2" square is the faintest and the
horizontals on both sides of "+6" are in the opposite direction to "+2", so the adjustment value
is between "+3" and "+5" depending on the degree of misalignment. After completing the
adjustment, adjust the paper feed again to check if the optimal adjustment value is set.
9. Troubleshooting
260
To Next Page
Loading...
