• The machine is performing maintenance operations.
• The machine has run out of paper.
• The ink collector unit is full.
1. Press [Settings] on the Home screen.
2. Press [Maintenance] [Cut Paper].
3. Select the paper input location and length to cut paper, and then press [Start].
The cutting length is set to [Short] when you select [Paper Input Location in Use].
4. Press [Close].
5. Press [Home] ( ) after completing the operation.
• For details about how to cut a paper roll while removing jammed paper, see the following section:
• See "When Paper or an Original Is Jammed", User Guide (Full Version).
9. Troubleshooting
262
To Next Page
Loading...
