Appendix
96
9
❖ Interface Priority Configuration
You can assign priorities governing which interface obtains AutoNet param-
eters.
msh> autonet priority interface_name
Note
❒ Priority assignment is useful when connecting more than one interface to
the printer.
❒ If an interface is not selected, the interface appears according to the cur-
rently set priority, regardless of multiple interface connections.
*1
Available when the IEEE 802.11b interface unit is installed.
Reference
For more information about AutoNet, see p.17 “Configuring a Windows
Server 2003 Computer”.
Changing the password
Use the “passwd” command to change the remote maintenance password.
Important
❒ Be sure not to forget or lose the password.
Note
❒ The default password is “password”.
A Enter “passwd”.
msh> passwd
B Enter the current password.
Old password:
C Enter the new password.
New password:
Note
❒ The password must consist of three to eight alphanumeric characters and
symbols. Passwords are case-sensitive. For example, “R” is different from “r”.
❒ The password is the same as that used in configuring the network interface
module with a Web Image Monitor and that used in NIB Setup Tool. If you
change a password from telnet, the other passwords are also changed.
D Enter the new password again.
Retype new password:
Interface name Interface to be configured
ether Ethernet interface
wlan
*1
IEEE 802.11b interface
To Next Page
Loading...
