Printing with NetWare
33
5
I Click [NDS mode], enter the file server name in the [File Server Name:] box, the
NDS tree name in the [NDS Tree:] box and the context in the [NDS Context:]
box, and then click [Next >].
•In the [File Server Name:] box, enter the file server name (up to 47 alphanu-
meric characters) of the server to make the print server. You can also click
[Browse...] to select a file server in the [Browse...] dialog box.
•In the [NDS Tree:] box, enter the NDS tree name (using up to 32 alphanu-
meric characters (“-” and “_” can be used)) of the NDS tree in which you
want to make the print server. [Browse...] to select an NDS tree from those
listed in the [Browse...] dialog box.
•In the [NDS Context:] box, enter the NDS context in which to make the print
server. As context, object names are entered in lower object order and di-
vided by a period. For example, if you want to create a print server in NET
under DS, enter “NET.DS”.
J Enter the print server name in the [Print Server Name:] box, the printer name
in the [Printer Name:] box, the print queue name in the [Print Queue Name:] box,
and the print queue volume in the [Queue Volume:], and then click [Next >].
•In the [Print Server Name:] box, enter the name of the NetWare print server
using up to 47 characters.
•In the [Printer Name:] box, enter the name of the NetWare printer using up
to 47 characters.
•In the [Print Queue Name:] box, enter the name of the print queue to be added
to NetWare.
•In [Queue Volume:], enter the print queue volume. As a volume, object
names are entered from a lower object and divided by a period. You can
also click [Browse...] to select a volume in the [Browse...] dialog box.
K After confirming the settings, click [Next >].
L Click [Finish].
The settings take effect, and NIB Setup Tool closes.
M Quit SmartDeviceMonitor for Admin.
To Next Page
Loading...
