Using the Printer Function
34
5
N Restart the printer.
Note
❒ To make sure the printer is correctly configured, enter the following from
the command prompt:
F:>NLIST USER /A/B
❒ If the printer works as configured, the name of the print server appears as
an attached user.
Using PureIP in the NetWare 5/5.1, 6 environment
Note
❒ When not using IPX, it is recommended that you change the print server pro-
tocol in the Web Image Monitor from [TCP/IP+IPX] to [TCP/IP].
A Log on to the file server as an administrator, or equivalent.
B Start SmartDeviceMonitor for Admin.
C On the [Group] menu, point to [Search Device], and then click [IPX/SPX].
A list of machines appears.
D In the list, select the printer for which you want to change configuration.
E On the [Tools] menu, click [NIB Setup Tool].
NIB Setup Tool starts.
F Click [Property Sheet], and then click [OK].
G If necessary, enter the print server name in the [Device Name:] box.
H Click the [NetWare] tab, and then make the following settings:
A In the [Logon Mode] area, click [File Server Mode] or [NDS mode].
Note
❒ If [File Server Mode] is selected, a connecting destination will be chosen
based on the string entered in step C.
❒ If [NDS mode] is selected, a connecting destination will be chosen based
on the string entered in step D.
B In the [Print Server Name:] box, enter the print server name.
Limitation
❒ Enter up to 47 alphanumeric characters.
To Next Page
Loading...
