Remote Maintenance by telnet
89
9
❖ Setting timeout
You can specify the timeout interval in use when receiving data from the net-
work.
msh> diprint timeout [30~65535]
Note
❒ The default is 300 seconds.
❖ Bidirectional configuration for the direct printing port
Use this setting to configure whether the direct printing port is bidirectional
or not. The default is “off”.
msh> diprint bidirect {on | off}
Note
❒ If you select “on”, SmartDeviceMonitor for Client or Standard TCP/IP on
Windows 2000 might not work correctly.
Netware
Use the “netware” command to configure the NetWare settings such as the print
server name or file server name.
msh> netware parameter
Parameter Settings
pname Enter the NetWare print server name using up to 47 characters.
fname Enter the NetWare file server name using up to 47 characters.
encap {802.3 | 802.2 | snap
| ethernet2 | auto}
Select the encap type.
rnum Specify the remote printer number.
timeout Set the timeout.
mode {pserver | ps} Select the print server mode.
mode {rprinter | rp} Select the remote printer mode.
context Specify the NDS context name.
sap_interval Specify the SAP intervals.
Each interval can be set to between 0 and 3600 seconds in one-
second increments.
login server Specify “login with a selected file server” as the login mode.
login tree Specify “login with a selected NDS tree” as the login mode.
tree NDS tree name Select the NDS tree to log on to.
To Next Page
Loading...
