Problem Cause Solution
• If you perform [Media Feed
Adjustment] and black streaks
occur on the printed image when
resolving uneven density, perform
[Media Feed Correction] in the
following procedure.
1. Press the [Standard
Procedure] key.
2. Press [Selected Setting for
Head Alignment].
3. Press [Media Feed
Correction].
4. Press [Media Feed
Correction].
5. Press [On].
6. Press [Close] twice.
7. Press [End].
The connection method for the print
heads will be applied to the first
printing job after these settings are
configured.
5. Troubleshooting
182
To Next Page
Loading...
