3. Maintenance RICOH Ri 2000 User Manual
142
Apply the dedicated grease to the Guide Rod. Use a new Cleaning Applicator for
application.
As shown in the following picture, add the grease.
• The Guide Rod: main
Apply approximately 0.01 ml of grease to each of the six peripheral parts of the arrow.
• The Guide Rod: front
The six peripheral parts of the arrow.
Grease coverage
The outer grease should be applied 60 to 80 mm from the end of the rod.
Apply the inner grease 30 to 50 mm from the carriage.
Sample of the amount of grease to be applied to six places on each
rod
After adding After applying
0.01 ~ 0.02 ml
(height: 2 mm)
To Next Page
Loading...
