8. Ink Path Guide RICOH Ri 2000 User Manual
201
・Since the cleaning solution in the cleaning
cartridge is consumed periodically, the
cleaning cartridge needs to be replaced
according to the duration. When the remaining
amount in the cleaning cartridge is low,
prepare a new cleaning cartridge.
・When performing cleaner charging for storing
or moving the printer, etc., please clean the
white and color at the same time.
・White fan filter replacement is not required.
4-color only (White Auto
Cleaning: OFF)
Color: Ink Charging
White: Cleaner Charging
<Displaying the Status Screen Menu>
White media
・This mode is set by setting the panel operation
[Settings tab] - [Ink path setting] - [Cleaner
charging] - [White] with 4-color only (White Auto
Cleaning: ON).
・In this mode, automatic cleaning to maintain
nozzle quality of the white head does not occur.
When preventing nozzle clogging of the white
head, it is necessary to attach a head protection
cover to the white carriage. Since printing will
not be possible once the head protection cover
is attached, we recommend that you use the
cover only during storage and transportation.
・Printing in this mode is possible only when
continuing to print without white ink in the future.
・If the head protection cover is not installed,
printing without white ink underbase or white
printing is possible. However, there is a
possibility that the white head may become
nozzle-clogged (malfunction) during the next ink
fill.
・Print data containing white cannot be printed
due to an error.
・The cleaning solution in the cleaning cartridge
is not consumed.
White fan filter replacement is not required.
Cleaner Charging
Color: Cleaner Charging
White: Cleaner Charging
<Displaying the Status Screen Menu>
Unprintable
・For long term storage/Shipping
・To prevent nozzle clogging of the whitehead,
attach a head protection cover to the
whitehead.
*For head protection cover installation instructions, see "Installation of the head protection cover" on page
213.
To Next Page
Loading...
