9. Troubleshooting Guide RICOH Ri 2000 User Manual
224
Align the left and right corners of the head protection cover with the carriage
corners.
The places to align are the right and left sides of the carriage, respectively, as shown below.
In doing so, be careful of the orientation of the head protection cover.
[Right side]
[Left side]
When installing the head protection cover standing on the right side of the printer, in front of the
maintenance unit, the two claws can be seen from the person installing the cover as shown
below.
Align the two corners of the head protection cover, represented by the red and blue circles, with
the corners of the carriage.
To Next Page
Loading...
