9. Troubleshooting Guide RICOH Ri 2000 User Manual
225
The left side of the two claws of the head protection cover should be aligned so that they are in
contact against the corners of the carriage. The right-hand claw, on the other hand, should be
lifted up and aligned against the corner of the carriage so that it rests against the corner of the
carriage.
The pawl on the side of the carriage that is not visible because it is in the shadow of the carriage
should be handled with the head protection cover parallel to the guide rod and carriage, so that
when the two pawls on the right side of the head protection cover are aligned with the mounting
position, they are simultaneously aligned with the mounting position. the two pawls on the right
side of the head protection cover can be aligned to the mounting position at the same time.
To Next Page
Loading...
