9. Troubleshooting Guide RICOH Ri 2000 User Manual
247
Press [START]. Maintenance begins.
※When canceling the maintenance at this time, detach the head protection cover and press
"CANCEL".
When [CANCEL] is pressed, the print head will be capped, and the maintenance will be completed.
However, please note that an error will occur if "CANCEL" is pressed while the head protection cover
is still attached.
When maintenance is started, the following message will be displayed.
The progress of the maintenance will be displayed in the upper left corner of the control panel.
You can force the maintenance to end by pressing "CANCEL" during the maintenance.
To Next Page
Loading...
