Ricoh Ri 2000 - Page 248

9. Troubleshooting Guide RICOH Ri 2000 User Manual
248
After maintenance is completed, open the front cover, and detach the head
protection cover.
When maintenance is completed, the following message appears with a buzzer sound.
For instructions on how to remove the head protection cover, see
“Removing the head
protection cover” on page 227 for removal instructions.
Press [NEXT].
The carriage moves to the right end, and the Head is capped.
※Please note that an error will occur if "CANCEL" is pressed while the head protection cover is still
attached.
Close the Front Cover.
Press [NEXT].
[NEXT] can only be pressed with the front cover close.
Press [NEXT] to start auto cleaning.
Auto cleaning takes up to 10 minutes.