Various Scan Settings
132
6
Programs
You can register frequently used settings in the machine memory and recall
them for future use.
Note
❒ You can register up to 10 programs for the scanner mode.
❒ Programs are not deleted by turning the power off or by pressing the {Clear
Modes} key unless the content is deleted or newly registered.
❒ The following settings can be registered to programs: Scan Settings, Original
Orientation, File Type, Store File, Preview, and Reception Notice.
❒ Setting made on the simplified display cannot be registered to a program.
Registering Frequently Used Setting
To register frequently used settings in a program:
A On the initial scanner screen, make the settings you want to register in a
program.
B Press the {Program} key.
C Press [mProgram].
D Select the number of the program in which you want to register the settings.
Program numbers with m already have settings in them.
ATG002S
To Next Page
Loading...
