Ricoh Scanner - Basic Operations When Using Scan to Folder

Basic Operations When Using Scan to Folder
45
2
Basic Operations When Using Scan to Folder
This section describes the basic operations involved in using Scan to Folder.
A Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B If the network delivery scanner screen or E-mail screen appears, switch to
the Scan to Folder screen.
For details, see "Switching to the Scan to Folder Screen".
C If necessary, press [Scan Settings] to specify scanner settings such as resolu-
tion and scan size.
For details, see "Various Scan Settings".
D If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
E If necessary, press [Orig. Orientation] to specify original orientation.
For details, see "Setting Original Orientation".
F If necessary, press [Send File Type / Name] to specify settings such as file name
and file format.
For details, see "Setting File Type and File Name".
G Specify the destination.
You can specify multiple destinations.
For details, see "Specifying Scan to Folder Destinations".