Storing Files Using the Scanner Function
78
3
D If necessary, switch to the E-mail, Scan to Folder, or network delivery scan-
ner screen.
For details about switching the screen, see "Switching to the E-mail Screen",
"Switching to the Scan to Folder Screen", or "Switching to the Network Deliv-
ery Scanner Screen".
E Specify the destination, make any other necessary settings.
For details about how to send a file by e-mail or Scan to Folder, or how to de-
liver a file, see "Basic Operation for Sending Files by E-mail", "Basic Opera-
tions When Using Scan to Folder", or "Basic Operation for Delivering Files".
F Press the {Start} key.
The stored file will be sent.
Note
❒ If you select a password-protected stored file, a screen for entering the
password appears. To select the file, enter the correct password, and then
press [OK].
❒ When the URL has been sent by e-mail, the recipient can check the stored
file by clicking that URL. For details, see "Sending the URL by E-mail".
Reference
p.16 “Basic Operation for Sending Scan Files by E-mail”
p.45 “Basic Operations When Using Scan to Folder”
p.87 “Basic Operation for Delivering Files”
p.19 “Switching to the E-mail Screen”
p.47 “Switching to the Scan to Folder Screen”
p.90 “Switching to the Network Delivery Scanner Screen”
p.37 “Sending the URL by E-mail”
To Next Page
Loading...
