Riedel Performer C44plus - User Manual

Digital Partyline
CR-4 • CR-2 • C3 • CD-2
CW-2 • C31 • C44 / C44plus
User Manual
USO RESTRITO

Summary

Safety Instructions

Performer CR-4; CR-2 Master Station

Performer CD-2 Desktop SPK;HS Station

Getting Started

Instructions for initial setup and integration of the CD-2 desktop station.

Performer C3 Digital Beltpack

User Elements Top

User Elements Bottom

Performer CW-2 Wall Mount SPK; HS Station

The Multi-Pin Connector

Performer C31 Split Box

User Elements “Upstream“

User Elements “Downstream“

Performer C44; C44 plus System Interface

Get Started

Instructions for connecting and powering the C44/C44plus system interface.

Basic Configuration

User Elements Front

User Elements Rear

Program Select via DIP Switch (Front)

Specifications

System Layouts

Stand Alone

Example of a basic standalone digital partyline system setup.

Integration with Artist;Performer Matrix

Integration with 3 rd Party Matrix

Troubleshooting

C3; CW-2 Error LED flickers

Troubleshooting steps for flickering error LEDs on C3/CW-2 devices.

Device does not start

Troubleshooting steps when a device fails to start.

Crackles and static on the partyline

Solutions for crackles and static noise on the partyline.

Audio not loud enough in headset

Troubleshooting steps for low audio volume in the headset.

No analog audio signal on C44

Steps to resolve no audio on C44 analog I/Os in stand-alone mode.

No audio signal from matrix to partyline

Troubleshooting audio signal loss from matrix to partyline.

Partyline connected but does not start

Steps for when the partyline is connected but does not start.

C3 cannot talk on partyline

Troubleshooting steps for inability to talk on the C3 partyline.

C3 cannot talk or listen

Troubleshooting steps for the C3 beltpack unable to talk or listen.

Riedel Performer C44plus Specifications