Figure 13.9 Option Settings Interface
Install the option
The option license is a string of fixed characters. The option file should be in specific
format, with the file extension “.lic”. After you purchase an option, you will obtain a
key (used for obtaining the desired option license). Please install the option following
the steps below.
1. Obtain an option license
a. Log in to the RIGOL official website (
http://www.rigol.com
), and click SERVICE
CENTRE > License Activation to enter the software license registration
interface.
b. In the software license registration interface, enter the correct key, serial
number (tap > Help > About to obtain the serial number), and verification
code. Then click
Generate to obtain the option license file download link. If you
need to use the file, please click the link to download the file to the root
directory of the USB storage device.
2. Install the option
a. Connect the USB storage device to the instrument. Press the front-panel
or tap > Store to enter the disk interface. You can also tap Install in the
option settings interface to access the disk interface.
b. Select the desired file and tap
Read to install the option.
c. After installation, a prompt message "Option activated successfully" is
displayed. After the option has been installed, it is recommended to restart the
instrument.
Utility
DP900 User Guide
76
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
Need help?
General
