Name: Rigol DS4024
Brand: Rigol
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 6 Operations and Measurements RIGOL

MSO4000/DS4000 User’s Guide 6-47

cursor A and cursor B positions are defined to “0°” and “360°” phase

positions respectively; at the same time, two unmovable vertical cursor

lines (with relatively lower brightness) are displayed on the screen as the

phase reference positions (“0°” and “360°” phase positions are marked by a

solid line and dotted line respectively). Before you setting them manually,

the oscilloscope will use the default phase reference positions.

 %: measure the ratio values at X cursors. In the measurement results, CurA,

CurB and △X are all expressed in percentage.

The oscilloscope allows you to set the ratio reference positions according to

your need. After adjusting the X cursors to the desired positions (refer to

step 4 “Ajust the X cursor positions”), press SetCursor and the current

cursor A and cursor B positions are defined to “0%” and “100%” ratio

positions respectively; at the same time, two unmovable vertical cursor

lines (with relatively lower brightness) are displayed on the screen as the

ratio reference positions (“0%” and “100%” ratio positions are marked by a

solid line and dotted line respectively). Before you setting them manually,

the oscilloscope will use the default ratio reference positions.

4. Ajust the X cursor positions

1) Press CursorA and turn the multi-function knob to adjust the

horizontal position of cursor A (X cursor). The adjustable range is limited

within the screen.

2) Press CursorB and turn the multi-function knob to adjust the

horizontal position of cursor B (X cursor). The adjustable range is limited

within the screen.

3) Press CursorAB and turn the multi-function knob to adjust the

horizontal positions of cursors A and B (X cursors) at the same time. The

adjustable range is limited within the screen. The horizontal distance

between cursor A and B (X cursors) keeps unchanged.

Note: When any of CursorA, CursorB and CursorAB is currently selected,

you can press the multi-function knob

continuously to quickly switch among

the three items.

Rigol DS4024 User Manual

Other manuals for Rigol DS4024