Name Address Type R W Description
Setpoint 6 source A4A6
H
uint8 A A Set setpoint 6 source:
0 is gross weight
1 is net weight.
Setpoint 6 Target A4A8
H
int32 A A Set setpoint 6 target.
Setpoint 6 Hysteresis A4A9
H
int32 A A Set setpoint 6 hysteresis.
Setpoint 6 in flight A4AA
H
int32 A A Set setpoint 6 in flight.
Setpoint 6 Timing A4B0
H
uint8 A A Setpoint 6 timing:
0 is level
1 is edge
2 is latch
3 is pulse.
Setpoint 6 Reset A4B1
H
uint8 A A Setpoint 6 rest:
0 is none
1 is reset A
2 is reset B.
Setpoint 7 type A4C1
H
uint8 A A Set setpoint 7 type:
0 is off
1 is on
2 is over
3 is under
4 is centre of zero
5 is zero band
6 is net
7 is motion
8 is error
9 is buzzer
10 is weigh out
11 is weigh in.
Setpoint 7 lock A4C2
H
uint8 A A Set setpoint 7 lock:
0 is off
1 is on.
Setpoint 7 logic A4C3
H
uint8 A A Set setpoint 7 logic:
0 is high
1 is low.
Setpoint 7 alarm A4C4
H
uint8 A A Set setpoint 7 alarm:
0 is none
1 is single beep
2 is double beep
3 is continuous beeping
4 is flash the display.
Setpoint 7 source A4C6
H
uint8 A A Set setpoint 7 source:
0 is gross weight
1 is net weight.
Setpoint 7 Target A4C8
H
int32 A A Set setpoint 7 target.
Setpoint 7 Hysteresis A4C9
H
int32 A A Set setpoint 7 hysteresis.
Setpoint 7 in flight A4CA
H
int32 A A Set setpoint 7 in flight.
Setpoint 7 Timing A4D0
H
uint8 A A Setpoint 7 timing:
0 is level
1 is edge
2 is latch
3 is pulse.
92 C500-600-2.0.3
To Next Page
Loading...
Need help?
General
