Rion VA-12 User Manual

115
Setup Files and Initialization
Saving settings on SD card as a group
To save  ve sets of settings (setup  les) of the VA-12 as a group on an SD
card, proceed as follows.
1. At the [SYSTEM] menu screen, select [Read/Save Setting] and press
the ENT key. The [System/Setting] screen comes up.
2. Select [Group Save for SD] and press the ENT key. The [SYSTEM/
Setting] screen comes up.
3. Select [------ (New File) ------].
4. Specify the settings group name (SET_0000 to SET_9999) and press
the ENT key.
Loading a setup  le group from SD card
Note
When a group of setup  les is loaded, setup  les
in the VA-12 will be overwritten. If necessary, you
should save the current setup  les on the SD card
before loading a new group of  les.
1. At the [SYSTEM] menu screen, select [Read/Save Setting] and press
the ENT key. The [System/Setting] screen comes up.
2. Select [Group Load/Delete for SD] and press the ENT key. The
[SYSTEM/Settings/SD read] screen comes up.
3. Select the group to load and press the ENT key.
Deleting a setup  le group from SD card
1. At the [SYSTEM] menu screen, select [Read/Save Setting] and press
the ENT key. The [System/Setting] screen comes up.
2. Select [Group Load/Delete for SD] and press the ENT key. The
[SYSTEM/Settings/SD read] screen comes up.
3. Select the group to delete and press the PAUSE/CONT key.

Rion VA-12 Specifications

General

Brand	Rion
Model	VA-12
Category	Measuring Instruments
Language	English