27
Menu Operation
Making a setting by direct edit
Numeric values such as date and time or sensor sensitivity can be set by
directly editing the setting.
1. Use the
/ keys to move the cursor to the menu item to set ([Other]
in the example).
2. Press the ENT key or the
key. The value can now be edited, two
digits at a time, as shown below.
[Analog Input] menu screen
3. When the value has been set, the cursor automatically moves to the
next two digits, and these can be edited.
Use the / keys to move to the item to change, and
use the / keys to change the numeric value.
Holding down the / keys changes the value
more quickly.
When the correct value has been set, press the ENT
key to accept the setting.
To cancel the procedure without changing the current
setting, press the START/STOP key or the key.
The cursor returns to the menu item name, and the
setting value reverts to the previous condition.
To Next Page
Loading...
Need help?
General
