26
Menu Operation
Making settings from a popup list
1. Use the / keys to move the cursor to the menu item to set ([High-
pass Filter] in the example).
2. Press the ENT key or the key. A popup list appears.
[Analog Input] menu screen
3. Use the
/ keys to make your selection.
Press the ENT key to accept the setting.
To cancel, press the START/STOP key or the key.
Note
The cursor will continue to move through the items
in the popup list also when the top/bottom boundary
is reached. For example, when you press the
key
while the cursor is on [1Hz], the highlight moves to
[1kHz]. When you press the
key in this condition,
the highlight moves back to [1Hz]. This allows you
to quickly bring the cursor to any desired item.
To Next Page
Loading...
Need help?
General
