Rion VM-55 - Command Description; Echo Back (S;R); Remote Mode (S;R)

146
Serial Interface
Command description
Communication
Echo
Echo back
Setting ON/OFF of echo back
Setting command Echo, p1
Parameter p1= “Off”
p1= “On”
Request command Echo?
Response data d1
Returned value Same as for setting command
Remote control
Remote mode
Setting ON/OFF of remote mode
When remote mode is “On”, the key operation of the unit is invalid (only
the POWER key and the LIGHT key are effective). When remote mode is
“Off”, the key operation of the unit is valid.
Setting command Remote Control, p1
Parameter p1= “Off” (Remote mode is OFF)
p1= “On” (Remote mode is ON)
Request command Remote
Control?
Response data d1
Returned value Same as for setting command