Rion VM-55 - Delay Time (S;R); Measurement Elapsed Time (R); Xch Underrange L V (R)

169
Serial Interface
Measurement Elapsed Time
Measurement elapsed time
Request measurement elapsed time (second)
Request command Measurement
Elapsed Time?
Response data d1= 0 to 3600000 (second)
There is no setting command
Measurement
Delay Time
Delay time
Setting delayed measurement time
Setting command Delay Time, p1
Parameter p1= “Off”
p1= “1s”
p1= “3s”
p1= “5s”
p1= “10s”
Request command Delay
Time?
Response data d1
Returned value Same as for setting command
Operation
Underrange Lv X
Xch underrange L
v
Request presence of underrange L
v
information of X channel
Request command Underrange Lv X?
Response data d1
Returned value d1= “Off” (there is no information)
d1= “On” (there is information)
There is no setting command