Rion VM-55 - Operation Channel (S;R); Output Displayed Value (R)

174
Serial Interface
Data output
DOD
Output displayed value
Send the request command at one second interval or longer.
Request command DOD?
Response data d1,d2,...,d45
Returned value d1 = “xxx.x” L
v
or L
va
of X channel
(Displayed characteristics)
d2 = 0 or 1 Overload information
(1: Yes, 0: No)
d3= 0 or 1 Under-range information
(1: Yes, 0: No)
d4 = “xxx.x” L
v
or L
va
of X channel
(Max hold value)
d5 = 0 or 1 Overload information
(1: Yes, 0: No)
d6 = “xxx.x” L
veq
or L
vaeq
of X channel
d7 = “xxx.x” L
vmax
or L
vamax
of X channel
d8 = “xxx.x” L
vmin
or L
vamin
of X channel
d9 = “xxx.x” L
5
of X channel (L
v
or L
va
)
d10 = “xxx.x” L
10
of X channel (L
v
or L
va
)
d11 = “xxx.x” L
50
of X channel (L
v
or L
va
)
d12 = “xxx.x” L
90
of X channel (L
v
or L
va
)
d13 = “xxx.x” L
95
of X channel (L
v
or L
va
)
d14 = 0 or 1 Overload information
(1: Yes, 0: No)
d15 = 0 or 1 Under-range information
(1: Yes, 0: No)
d16 to d30 : Y channel information
(Same format as X channel)
d31 to d45 : Z channel information
(Same format as X channel)
* “xxx.x” is  xed at 5 digit length. Higher digits are padded with
spaces as required.
* When operation channel is set to Z, d1 to d30 are returned as “-”.
There is no setting command