Rion VM-55 - Comparator Level (S;R); Comparator Setting (S;R); Output Frequency Characteristic (S;R)

155
Serial Interface
OUTPUT Band
Output frequency characteristic
Setting output frequency characteristic
Setting command OUTPUT
Band, p1
Parameter p1= “Lv”
p1= “Lva”
p1= “Disp” (Inter lock)
Request command OUTPUT
Band?
Response data d1
Returned value Same as for setting command
IO Setting
Comparator setting
Setting ON/OFF of comparator
Setting command IO Setting, p1
Parameter p1= “Off”
p1= “Comparator” (when VX-55EX is installed)
Request command IO
Setting?
Response data d1
Returned value Same as for setting command
Comparator Level
Comparator level
Setting comparator level
Setting command Comparator
Level, p1
Parameter p1= 30 to 120 (1 steps)
Request command Comparator
Level?
Response data d1
Returned value Same as for setting command