Rion VM-55 - Connection to a Level Recorder (LR-07) and Data Recorder (DA-21, DA-40)

29
Preparations
Connection to a level recorder (LR-07) and data
recorder (DA-21, DA-40)
Connect the OUTPUT connector on the right side of the VM-55 with an input
connector of level recorder (LR-07) and data recorder (DA-21, DA-40), using
the optional BNC - Pin output cord CC-24 as shown below. The performance
of other cables is not guaranteed.
To make settings for signal output ON/OFF and AC/DC selection, use the
Display/ I/O screen. (Set [Output] to “ON” and [Type] to “AC OUT”. See
page 122 for details.)
OUTPUT
X
Y
Z
BNC connector
OUTPUT
connectors
Open
the side cover
BNC - Pin output cord CC-24
To input connector
on level recorder (LR-07)
and data recorder (DA-21, DA-40)