28
Preparations
BL2-58 setting
Perform the following steps to change the setting.
1. Turn power to the BL2-58 on while holding down the SELECT button.
The mode selection is printed.
2. Use the FEED button to select the function setting mode.
3. Using the FEED button to enter YES and the SELECT button to
enter NO, make the setting as follows.
- BAUD RATE: Select one of the available settings:
9600, 19200, 38400, 57600, 115200 (bps)
* Match the setting to the setting of the VM-55.
Leave all other printer settings in the default condition.
4. When the setting is complete, the indication [SETTING MODE END]
is printed.
For information on the printer default settings, refer to the Instruction Manual
of the BL2-58.
To Next Page
Loading...
