Rion VM-55 - Eq Calculation Interval of User Setting (Unit) (S;R); Measurement Time of Manual Store (S;R)

160
Serial Interface
Leq Calculation Interval (Unit)
L
eq
calculation interval of user setting (unit)
Setting time unit when “Leq Calculation Interval Preset” command
parameter is “Manual”
Setting command Leq
Calculation Interval (Unit), p1
Parameter p1= “s”
p1= “m”
p1= “h”
Request command Leq
Calculation Interval (Unit)?
Response data d1
Returned value Same as for setting command
Measurement Time Preset Manual
Measurement time of manual store
Setting measurement time of the manual store mode
Setting command Measurement
Time Preset Manual, p1
Parameter p1= “10s”
p1= “1m”
p1= “5m”
p1= “10m”
p1= “15m”
p1= “30m”
p1= “1h”
p1= “8h”
p1= “24h”
p1= “Manual” (user setting)
p1= “500s”
Request command Measurement
Time Preset Manual?
Response data d1
Returned value Same as for setting command