Rion VM-55 - Page 175

163
Serial Interface
Measurement Time Auto (Unit)
Total measurement time of user setting on auto store (unit)
Setting time unit when “Measurement Time Preset” command parameter
is “Manual” on auto store mode
Setting command Measurement
Time Auto (Unit), p1
Parameter p1= “s”
p1= “m”
p1= “h”
Request command Measurement
Time Auto (Unit)?
Response data d1
Returned value Same as for setting command
Measurement Time Preset
Measurement time of manual store/Total measurement time of
auto store
Setting measurement time of the manual store mode and total measurement
time of the auto store mode
Setting command Measurement Time Preset, p1
Parameter p1= “10s”
p1= “1m”
p1= “5m”
p1= “10m”
p1= “15m”
p1= “30m”
p1= “1h”
p1= “8h”
p1= “24h”
p1= “Manual” (user setting)
p1= “500s”
Request command Measurement
Time Preset?
Response data d1
Returned value Same as for setting command