79
Store Operation
Auto (only when the VX-55EX is installed)
The processing result which is obtained using the selected vibration level and
speci ed interval by the store interval setting will be recorded continuously.
When the following one of conditions occurred, the store is stopped and data
is saved.
• When the total measurement time reached the set value.
• When the L
eq
store reached 999,999 sets.
• When the capacity of the SD memory card became insuf cient.
L
V
store
The vibration level and vibration acceleration level of up to 1,000 hours
can be stored continuously and automatically.
This function becomes available when an SD memory card is inserted.
This is useful when recording the vibration level waveform.
The store interval can be selected from 100 ms (milliseconds), 1 s (second).
L
eq
store
All processed data except vibration level and vibration acceleration level
are considered as a single data set, and up to 999,999 data sets can be
stored continuously and automatically.
This function becomes available when an SD memory card is inserted.
This is suitable for a measurement with a speci ed long period of time.
The processing interval can be selected from 500 s (seconds), 10 s, 1 min
(minute), 5 min, 10 min, 30 min, 1 h (hour), 8 h, 24 h and manually selected
time (user setting; up to 24 hours).
To Next Page
Loading...
