EasyManua.ls Logo

Robinson R66 - Page 24

Robinson R66
950 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 1.14 Chapter 1 General JUL 2020
1-92 Additional Component Maintenance (continued)
B. 2000 HOURS
Remove the following components when they have accumulated 2000 hours time in
service since new or since last overhaul, and perform action indicated:
Part Number Description Action
A120-5 Bellcrank – Aft
Replace with new.
A130-48 Spacer (at A462-4 fittings)
Replace with new.
A215-015 O-Ring (rollover valves)
Replace with new.
A462-4 Fitting – Control Cable
Replace with new.
A522-10 Control Cable (FCU fuel cutoff)
Replace with new, or replace inner wire.
A522-11 Control Cable (fuel valve)
Replace with new, or replace inner wire.
A522-14 Control Cable (heater valve)
Replace with new, or replace inner wire.
A729-68
Tube (black, earlier ships; used with
G727-1 engine gearbox vent tube)
Replace with new.
A785-36 Hose (engine gearbox vent; earlier ships)
Install KI-258 Firewall Drain Tube
Upgrade Kit.
A785-37 Hose (inducer bleed)
Replace with new.
A785-38 Hose (starter-generator)
Replace with new.
A918-1 thru -8,
-19, or -20
Elastic Cord Assembly
Replace with new. Dash number is
selected during flight test evaluation.
A947-2 Flex Plate Assembly (engine driveline)
Replace with new.
B173-5 V-Belt – Compressor Drive (cabin air
conditioning)
Replace with new.
B277-32 Clamp (inducer bleed hose, at engine)
Replace with new.
C005-4 Main Rotor Hub (C154-1) &
Bearing Assembly
Replace with new.
C005-13 Main Rotor Blade and Spindle Assembly
Replace with new or overhaul exchange
C005-13 main rotor blade and spindle
assembly.
C008-10 Tail Rotor Assembly
Replace with new.
C017-6 Swashplate Assembly
Submit to RHC-authorized component
maintenance facility for overhaul, or
replace with new or overhaul exchange.
C021-1 Tail Rotor Gearbox Assembly
Replace with new or overhaul exchange
tail rotor gearbox assembly.
C031-1 Tail Rotor Pitch Control
Replace with new.
C119-2 Bumper – Tail Rotor
Replace with new.
C258-1 Main Rotor Pitch Link Assembly
Replace with new C258-5 link
assembly.
C258-5 Main Rotor Pitch Link Assembly
Replace with new, or perform
inspection per § 5-51 and magnetic
particle inspect barrel.
C522-10 Control Cable (FCU throttle)
Replace with new.
C522-11 Control Cable (PTG)
Replace with new.

Table of Contents