Page 95.26 Chapter 95 Instrument System APR 2019
95-71 Garmin Display Unit (GDU) 1060 (continued)
E. Scheduled Maintenance and Inspections
Refer to Garmin G500H Instructions for Continued Airworthiness.
NOTE
All factory-installed Garmin units are “on condition” and do not
require scheduled periodic maintenance. Units feature a BIT
(Built-In Test) function during each initial power-up that will
detect internal failure(s) and alert pilot.
NOTE
Refer to § 97-60 for avionics software information.
FIGURE 95-6 GARMIN G500H UPPER CONSOLE WITH GDU 620
To Next Page
Loading...
