APR 2019 Chapter 5 Inspections Page 5.29
5-45 100-Hour / Annual Inspection (continued)
TAILCONE (continued)
Tailcone Exterior:
Inspect condition. Refer to § 53-41. Inspect tailcone exterior for nicks, scratches,
dents, cracks, corrosion, fretting or loose rivets. Verify no obstructions in drain hole
at forward edge of each bay (except forward bay).
Antennas:
Inspect condition. Verify no cracks where antennas mount to tailcone. Verify
security.
Anti-Collision Light:
Inspect condition. Verify no cracks where anti-collision light mounts to tailcone.
Verify lens cleanliness, clarity, and security. Verify proper operation.
Tail Rotor Visual Warning Guard:
Inspect condition. Verify no cracks where guard mounts to tailcone. Inspect guard
welds for cracks or corrosion. Verify security.
Wiring:
Inspect condition. Verify no loose, chafed, or broken wires or terminals. Verify
neatness, proper routing and installation, and security.
Fasteners & Torque Stripes:
Inspect condition. Verify proper installation and security of fasteners. Renew
deteriorated torque stripes per Figure 5-1.
Close & Secure:
Verify foreign objects are removed. Verify equipment security. Verify cleanliness
of interior and of inspection plugs. Install plugs removed in preceding steps. Verify
security.
To Next Page
