9.3. RECOMMENDED SPARE PARTS LIST
List of the spare parts that wear easily and that should be always available to avoid long machine downtimes.
- Cutting blade.
To order them, contact your local dealer and refer to the spare parts catalogue.
Important
Replace worn parts with original spare parts.
Use oils and greases recommended by the Manufacturer.
All the above will ensure the proper operation of the machine and the correct level of safety.
9.4. MACHINE DECOMMISSIONING AND SCRAPPING
Important
These operations must be performed by specialised operators in accordance with the standards in force
on workplace safety.
Do not dispose of non-biodegradable products, lubricant oil and non-ferrous components (rubber, PVC,
resins, etc.) into the environment.
Dispose of them in compliance with current regulations.
Useful information for the disposal of machines and machine parts.
Scrapping must be performed by qualified personnel.
Construction materials:
- low-density linear polyethylene (L.L.D.PE);
- steel, aluminium and cast iron;
- copper and silver for the electrical/electronic components;
- rubber, resins and fibres.
None of the components is harmful or toxic.
Pay special attention when disposing of oil or grease residues used in motor reducers.
Do not dump these materials in the environment and do not dispose of them as household waste.
To Next Page
Loading...
