3. TECHNICAL INFORMATION
3.1. MACHINE GENERAL DESCRIPTION
The above-mentioned machine is a rotary ring wrapping machine intended to spiral wrap products of varying size and
shape.
Stretch film spools commonly available on the market are used for wrapping.
Wrapping is performed by combining film spool rotation with the horizontal movement of the product.
The operator must place the product on the machine and start the cycle using the foot pedal control, subsequent
wrapping, length wrapping, film fastening and cutting operations are automatic.
The machine is equipped with a series of safety devices designed to avoid any injuries to the operator or other persons
using the machine.
Danger - warning
This machine is normally installed in workshops or industrial environments protected from the atmospheric
agents.
Using this machine in explosive environments or when exposed to atmospheric agents is strictly forbidden.
To Next Page
Loading...
