INFORMATION ON HANDLING AND INSTALLATION
4.5. INSTALLATION OF THE MACHINE
Unpacking
1.
Take off the cover cloth.
2.
Remove the fasteners from all components (plastic strap or wooden anchors).
3.
Visually check the material making sure it is not damaged in any way.
Important
You are advised to keep the packaging material.
How to carry out the standard assembly
Danger - warning
Authorised technical service personnel must perform installation and assembly operations.
1.
Remove the screws that retain the machine to the wooden pallet.
2.
Insert the forklift truck forks in the specially designed spaces provided in the base.
3.
Lift the machine from the pallet.
4. Insert support feet in the place of the fastening screws.
5. Place the machine in the area assigned for assembly.
Danger - warning
To perform the operation in safety conditions, insert some wooden blocks under the forks of the forklift
truck and place everything on the floor.
To Next Page
Loading...
