2.5. SAFETY WARNINGS ON RESIDUAL RISKS
During design and manufacturing, the Manufacturer has paid particular attention to the residual risks that may affect the
safety and health of the operators.
The residual risks are: “all the risks that persists although all safety solutions have been applied and integrated during
machine design”.
The list specifies the residual risks specific for this type of machine.
Danger on the infeed conveyor:
The conveyor is able to support products up
to a certain length (approximately 700 mm).
Longer products or improperly balanced, once
placed on the conveyor, may fall onto the
operator.
When these types of products require
wrapping, arranging a support that can
sustain the protruding part of the product
being processed is recommended.
Danger on the outfeed conveyor:
The conveyor is able to support products up
to a certain length (approximately 700 mm).
Longer products or improperly balanced, once
placed on the conveyor, may fall onto the
operator.
When these types of products require
wrapping, arranging a support that can
sustain the protruding part of the product
being processed is recommended.
To Next Page
Loading...
