“Total” wrapping
After the product has been placed on the infeed conveyor, press the button “Start” on the control panel to enable the
automatism and press the foot pedal control to start the work cycle.
Phase 1
The conveyor starts and moves the product towards the
rotary ring.
The product engages photocell (B1), the infeed presser
lowers and blocks the product, the “head positioning”
timer starts.
When the timer count is over, the roller conveyor stops,
the rotary rings starts and activates the “head and tail
wraps” count; the head of the product is wrapped.
To Next Page
Loading...
