Robopac Compacta S9 - Page 33

33
TECHNICAL INFORMATION
ENG
Phase 2
Infeed and outfeed conveyors start.
The product moves forward and engages photocell (B2).
The outfeed presser lowers on the product.
Phase 3
The “central bands” timer starts; at count completed, the
conveyor stops, the rotary ring starts and counts the
“reinforcing wrappings” set; the product is wrapped for the
number of reinforcing wraps set.
Important
The number of central bands is determined by
the “central bands” timer, the conveyor speed
and the product length.