Robopac Compacta S9 - Page 86

ENG
INFORMATION ABOUT THE USE
86
1. Rotation of the
slewing ring/spool
change.
2. Incoming product
presser
upstroke/downstroke.
3. Outgoing product
presser
upstroke/downstroke.
4. Product
infeed/outfeed
conveyor
forward/backward.
5. Rotary cutting unit
exit/return.
6. Clamp exit/return.
7. Sealer/block on the
striker plate
upstroke/downstroke.
8. Exit/return of the
cutting blade.
9. Opening/closing of the
guides at product
infeed.
10. Opening/closing of the
guides at product
outfeed.