Robustel R1520 User Guide
RT056_UG_R1520_v.1.0.3 Dec. 25, 2021 139/159
XML command:
<lan>
<network max_entry_num="2">
<id>1</id>
<interface>lan0</interface>
<ip>172.16.24.24</ip>
<netmask>255.255.0.0</netmask>
<mtu>1500</mtu>
SMS cmd:
set lan network 1 interface lan0
set lan network 1 ip 172.16.24.24
set lan network 1 netmask 255.255.0.0
set lan network 1 mtu 1500
3. The semicolon character (‘;’) is used to separate more than one command packed in a single SMS.
4. E.g.
Password mode—admin:admin;status system
In this command, username is “admin”, password is “admin”, The control command is status system, and the
function of the command is to get the system status.
SMS received:
hardware_version = 1.1
firmware_version = 3.1.0
firmware_version_full = "3.1.0 (Rev 3199)"
kernel_version = 4.9.152
device_model = R1520
serial_number = ""
uptime = "0 days, 00:02:55"
To Next Page
Loading...
Need help?
General