Robustel R1520 User Guide
RT056_UG_R1520_v.1.0.3 Dec. 25, 2021 151/159
6.4 Quick Start with Configuration ExampleS
The best and quickest way to master CLI is firstly to view all features from the webpage and then read all CLI
commands at a time, finally learn to configure it with some reference examples.
Example 1: Show current version
# status system
hardware_version = 1.1
firmware_version =3.1.0
firmware_version_full = "3.1.0 (Rev 3199)"
kernel_version = 4.9.152
device_model = R1520
serial_number = ""
uptime = "0 days, 00:06:51"
system_time = "Thu May 14 05:55:52 2020 (NTP not updated)"
ram_usage = "74M Free/128M Total"
Example 2: Update firmware via tftp
# tftpupdate （space+?）
firmware New firmware
# tftpupdate firmware （space+?）
String Firmware name
# tftpupdate firmware r1520-firmware-3.1.0.ruf host 192.168.100.99 // enter a new firmware name
Downloading
r1520-firmware-s 100% |*******************************| 5018k 0：00：00 ETA
Flashing
Checking 100%
Decrypting 100%
Flashing 100%
Verifying 100%
Verfify Success
upgrade success // update success
# config save_and_apply
OK // make you configuration effect after reboot
Example 3: Set link-manager
# set
# set (space+?)
ai AI
cellular Cellular
To Next Page
Loading...
Need help?
General