Robustel R1520 User Guide
RT056_UG_R1520_v.1.0.3 Dec. 25, 2021 46/159
Indicate the ordinal of the list.
Show the editing port.
Note: Lan1 is available only if it was selected by one of ETH1~ETH4 in
Ethernet > Ports > Port Settings.
Set the IP address of the LAN port.
Set the Netmask of the LAN port.
Enter the Maximum Transmission Unit.
The window is displayed as below when choosing “Server” as the mode.
The window is displayed as below when choosing “Relay” as the mode.
To Next Page
Loading...
