116 Rockwell Automation Publication ICSTT-RM447M-EN-P - July 2019
Chapter 7 Module Overview and Specifications
T9300 I/O Base Unit (3 way)
The AADvance controller has T9300 I/O base units for the I/O modules. An
I/O base unit supports a maximum of three I/O modules (of any type), and
their related termination assemblies. Each base unit can be mounted onto
standard DIN rails or directly onto a panel or wall. The moldings use slots and
clamps for DIN rail mountings, and holes for screw fixing.
It contains a passive backplane that supplies the electrical connections between
the I/O modules and the T9100 processor base unit; i.e. the command and
response buses and the system power.
To Next Page
Loading...
