Rockwell Automation Publication ICSTT-RM447M-EN-P - July 2019 51
The AADvance Safety Controller Chapter 2
It is recommended that the PC has a 2.2 GHz or higher CPU; 1,024 MB or
more RAM, a 1,280 x 1,024 display and a 7,200 RPM or higher hard disk.
It is also recommended that the hard disk has at least 10 GB free space. This
provides sufficient space to hold the distribution zip file, the unzipped source
files and the installed program files, and also enough space for Windows to
operate reasonably quickly. You can get back a lot of this space by deleting the
source files after finishing the installation.
Importing and Exporting Data
The AADvance Workbench can import and export existing data in standard
file formats such as Microsoft Excel.
AADvance Workbench Licensing
The AADvance Workbench is licensed software. There are three types of
license: full, single controller and demo.
• The single controller license is applicable for applications which use only
one controller. The software features which add a second or subsequent
controller to the project are disabled, and you cannot open an existing
project which uses more than one controller.
• The full license supplies all of the features of the AADvance
Workbench. It is applicable for applications with one or more
controllers.
• The demo license is a like a full license, but with a time limit. You can use
all of the features of the AADvance Workbench for up to 30 days after
first running the AADvance Workbench is first run.
A demo license is supplied free of charge for a first installation on a computer.
You change the demo license to a single controller license or a full license by
purchasing an unlock code from Rockwell Automation, and entering the code
into the software. When you use the demo license, the AADvance Workbench
displays a Demo License window each time you try to open a project. The
window includes the contact details at Rockwell Automation required for
purchasing a license.
If you try to use the demo license for more than 30 days, the license expires. You
cannot open a project or create a new one until you purchase a license.
To Next Page
Loading...
Need help?
General
